2024-released ultimate scan tool LAUNCH X431 PAD V ELITE is an unexpected high-end diagnostic tool from LAUNCH, comes with the all-in-one features, Perform ECU Reprogramming, all services functions, Bidirectional Control, ADAS calibration function, TPMS service, and 8 extended modules functions.

New Smartlink C VCI powers technicians a new diagnostic level without the limitation of diagnostic functions, tools, and vehicle types.

• Programming new ECUs: Replace new ECU (Determine if programming or coding is required based on fault code prompts). It can read and back up the original ECU data of the vehicle. (Note: The newly purchased spare part numbers need to be equal to the original ones.)
• Reprogramming second-hand ECUs: Clear second-hand ECU data for reprogramming (if the second-hand has the anti-theft data, it needs to be used with LAUNCH X-PROG3 to clear anti-theft data first, and then match it with the original anti-theft data before reprogramming).
• Update the ECU: Some of the ECU has BUGs so it will cause some faults that are difficult to repair. (For BMW 2889 DME intake valve, carbon deposition, and some of F serious machine oil lamps can't be zero.)
• Fixing lost data of ECU: When the software in the ECU corrupts the program due to battery or grounding issues (the Hardware is normal), re-programming can rectify it back to normal operation.
• Reprogramming on failed programming ECU: If the programming fails but the hardware didn't damage, the LAUNCH X431 PAD V Elite can reprogram the module in Manual Mode which is compatible for VW/ for Audi/ for Benz/ for BMW. And it supports Programming Backup/ Restoration that is applied to match anti-theft data for Mercedes-Benz engine modules and transmission modules, which requires purchasing X-431 PROG3 additionally (If the programming fails, ECU will not communicate and you will not be able to access the system).

Please Note: Programming is no IP Limited except Spain and Portugal.

• Support 30+ Car Brands: Covering European cars, American cars, Asian cars and Chinese cars, and keep increasing.
• Comprehensive Functions: Including Online Coding, Online Programming, Online Parametric Configuration, On-Line Matching And Calibration, Fuel Quality Defect Firmware Upgrade and more.
• Applicable vehicle models for online programming: For Mercedes-Benz, For BMW, For VW, For AUDI, For SKODA, For Land rover, For Jaguar, For Renault, For Nissan (Venucia), For Subaru, For ISUZU, For Hyundai, For Beijing-Hyundai, For Kia, For Yueda-Kia, For Great Wall Motor, For Trumpchi, For FORTHING, For AEOLUS, For Chery, For Seat, For Jetour, For EXEED, For Porsche, For Jinbei, For ZXAUTO, For NAVECO, For Changhe, For FAW car, keep increasing...

• LAUNCH X431 PAD V Elite is the only one that supports J2534 Online + Offline / J2534 Programming Tool, also supporting ECU Online + Offline Coding Function!
• Newly designed for All Makes, All Models, and Full system diagnosis to assist technicians at all skill levels.
• Upgrade all functions of X431 V, PRO3S+, PAD3. With the SmartLink C, you can download the OEM software from the manufacturer's server for free.
• Supports all new J2534 / DOIP / CANFD protocols to access data and OE programming downloads for most cars. Also supports DC9-36V for HD Vehicles (saves $900+ by eliminating the need to buy an HD Module).
• Supports all reset functions: more than 50 resets reaching into the smallest parts. Extra 300+ repair functions for specific models.
• Workshop-level tool with repair fix solutions database: Code Assist, Repair Tips, Component Measurement, TSB, Relevant Cases, and DTC Analysis.
• Special promotion package includes 2 years of free updates and a 5-year warranty.

Language support is completely open and free to switch at will:

Programming Function is to finish program/ rewrite/ code/ match new ECU after new module replacement. Taking your business to a new height, it can:

• Program the new adaptive data to the on-board modules;
• Replace the existing software/ firmware in the ECUs;
• Match the component control modules after repair or replacement;
• Flash the hidden functions and retrofit & Personalization;
• Enhance the vehicle performance.

Online Programming downloads the original data from the automaker service directly. It ensures the correctness and latest version of the data, significantly improving the success rate of programming.

Offline/ J2534 Programming is used when you already have the data, writing it to your ECU directly (if you do not have the data, you cannot perform the programming function).

• Online programming does not require an expensive online account; simply connect to Wi-Fi to save maintenance costs.
• SmartLink C adopts dual Wi-Fi communication to improve programming speed, reducing the possibility of transmission errors.
• Using J2534 eliminates secondary issues like adapting computers, setup costs, and missing functions, making it a highly cost-effective all-in-one solution.

The optimization of communication with modern and future vehicles dramatically improves scanning, coding, and reprogramming performance:

• Realizes simultaneous data download, transfer, and online writing during programming, utilizing stable and solid 5G Wi-Fi network transmission.
• Compatible with J2534 / DOIP / CANFD / D-PDU / RP1210 protocols, giving you power to access data and OE programming downloads for Toyota, Honda, Volvo, VW, GM, Chrysler, Benz, Jaguar, Land Rover, and BMW E/F/G Chassis.
• Serves as a wireless VCI allowing the vehicle to transmit data to the diagnostic tablet without a physical cable connection.
• Offers OE-level aftermarket coverage to maximize manipulation and calibration previously restricted to manufacturer software controls.

After replacing an ECU/module, you must follow strict manufacturer procedures to match, learn, code, or program it before it functions normally. Otherwise, the car cannot start or certain parts will fail to operate.

Featuring ECU/Module replacement functions, LAUNCH X431 PAD V helps you initialize, match, relearn, or code the newly replaced ECU/module to get it back on track.

• ECU Coding: Customize your car in minutes by changing preprogrammed options (e.g., setting alarms, door locking behavior).
• Hidden Features: Access the ECU to make full use of hidden features or disable annoying functions (e.g., activating auto folding side mirrors, disabling automatic engine Start-Stop).
• Performance Fixes: Resolve issues of drivability, power loss, and fuel efficiency to optimize car performance.
• ECU Online Coding: Available for BMW, VW, Porsche, Renault, and more.

Capable of performing Active Tests to access vehicle-specific subsystems and component tests. The scanner outputs commands to the ECU to drive actuators in order to determine the integrity of systems or parts by reading ECU data or monitoring actuator operations (e.g., actuating relays, injectors, coils, solenoids, or opening EGR valves to observe idle response and oxygen sensor voltage).

Color-coded topology displays all system status in one page, showing the communication structure between modules:

• Displays the entire system through the Topology Map to easily glance at all modules with trouble codes, simplifying fault localization.
• Supports 5 ways of DTC display: Topology, list, unit-specific click, Intelligent Diagnostics details, and vehicle diagnosis report.
• Communication status between modules is instantly visual, enabling quick, intuitive troubleshooting.

If you need heavy duty truck software, it can be purchased and authorized separately to diagnose 12v cars and 24v trucks without an external HD module (comes with Non-16pin connector kit).

Deep diagnosis across PCM (Drive System), Chassis System, BCM (Body System), and Electrical System:

• Read & Clear Codes: Decodes DTCs to identify fault locations and turns off the MIL post-repair.
• Retrieve ECU Information: Accesses vehicle unit specifications.
• Live Data Stream: Graphs dynamic data streams to monitor vehicle conditions in real-time.
• ABS & SRS Diagnostic: Pinpoints blown fuses, low fluids, bad sensors, or wire connection issues.
• TPMS & Transmission: Verifies tire pressure monitor errors, gear grinding, slipping, or fluid leaks.

(Pls note different reset functions support different cars. Please check the detailed vehicle compatibility list.)

Provides step-by-step repair guidance for technicians to prevent wrong operations. Compatible with VAG series vehicles (For Volkswagen / Audi / Skoda / Seat etc.).

• 12-in-1 Graphic Data Flow: Analyzes PCM, ABS, SRS, and transmission issues, generates diagnosis reports, and replays freeze frames.
• OBD2 Pin Detection: Automatically detects the voltage of vehicle OBD-II diagnostic socket pins to judge port issues.
• Intelligent Diagnose: Automatically identifies VIN to match diagnostic databases without manual entry.
• Remote Diagnosis: Supports Device-To-Device and Device-To-PC connections for remote support.

• 1pc * X-431 PAD V Elite 10" Tablet PC
• 1pc * SMARTLINK C Diagnostic connector
• 1pc * Charging Slot of X-431 PAD V Elite
• 1pc * A6 Network Cable
• 1pc * Diagnostic Cable
• 1pc * EU PLUG / US PLUG
• 1pcs * USB Type B cable
• 2pcs * Type C cable
• 1pc * Product Manual & password letter
• 1pc * Product List paper & chassis & Carton