Battery Repair Devices 2~24S 3A 4A Intelligent Automatic Equalizer Active Balancer For Lipo Lifepo4 Battery Repair Equipment

Product Description

Active Balancer Overview

HTB-J24S04A Key Parameters

The maximum balance current of NCM can reach 4A, and the maximum balance current of LFP can reach 3A.
  • Supports 2-24 series of lithium batteries (ternary lithium, lithium iron phosphate, lithium cobalt titanium, batteries with voltages between 2V and 4.5V).
  • Automatically identify the balanced voltage as the lowest voltage string.
  • Automatically identify the number of battery strings.
  • Equipped with reverse connection, overvoltage (4.5V), and low-voltage (2V) alarms.
  • After balancing is completed, it will automatically stop and sound an alarm.

Specifications

Product: Battery active balancer equipment 2~24S fast Automatic Equalizer for Lipo Lifepo4 LTO Battery repair
Warehouse: EU, America, Chinese mainland warehouse
Material: PCB board
Country of origin: China
MOQ: 1 pcs
Balance Type: Discharge Balancer
Active Balancer Spec details

Technical Parameters

Product HTB-J24S04A
Power supply DC 12V 5A
Single Channel Voltage Detection Range 1V-5V
Single Channel Voltage Display Accuracy 0.001V
Single Channel Voltage Detection Accuracy ± (0.05%+0.003V)
Single Channel Voltage Working Range 2.0V-4.5V
Adjustable Balancing Current The maximum balance current of NCM can reach 4A, and the maximum balance current of LFP can reach 3A.
Applicable Battery Type NCM, LFP, LTO, or batteries with nominal voltage between 2V and 4.5V
Working Temperature and Humidity Temperature 0℃~50℃, humidity 20%~80%RH
Working Environment No corrosive, explosive, insulation-damaging gas or conductive dust, etc.

Products Description

Product Description

Summary

  • This equalizer directly displays the sum and voltage difference of each string.
  • The equalizer starts the compensation with a button, and stops automatically after the compensation is complete, and warns.
  • The equalizer does not charge the batteries during the balancing process. So do not worry about the risk of overloading the balance.

Hint

Before balancing, please check if the lowest voltage is lower than the battery over-discharge voltage. If it is lower than the battery over-discharge voltage, please charge the balance first, and the battery is fully charged and then balance, the effect will be better.
Active Balancer Details

Product Gallery

Product Features

Support 2~24 series lithium battery, support ternary lithium, lithium iron phosphate, to cobalt lithium, support 1.5V~4.5V battery. The voltage is out of the range, it will sound a warning and display reverse polarity warning and reminder. After connection reverse, overvoltage (greater than 4.5V), low voltage (less than 1.5V) protection functions are balanced, it will stop automatically, and a warning sound will sound to indicate that the balance is complete.
Constant resistance 1 ohm discharge balancing.

Large balancing current:

  • Ternary lithium - 4A Max
  • Lifepo4 - 3A Max
Displays: the voltage of each string, total voltage, highest string voltage, lowest string voltage, maximum voltage difference from battery pack, average voltage, balanced voltage, number of battery strings.
Battery maintenance steps

Battery Maintenance Steps

If it is a bad battery cell:
  • Replace the battery cell
  • Fully charged
  • Balance
  • Fully charged
  • Battery maintenance completed

Discharge Method

Advantages:

  1. Do not charge the batteries, do not worry about overcharging problems.
  2. The speed of the whole balancing process is the same, and the balancing speed is fast.
Conclusions: Since the balancing method is to discharge the high-voltage string energy, until it is equal to the lowest voltage string, the excess energy is wasted.

Package Included

Silicone wire alligator clip accessory
16awg silicone wire Blue with alligator clip (Buy separately)
Connector details

Packing & Shipping

Packing and Shipping details

Production Showcase

Factory assembly line
Production facility

FAQ

Can you accept customization?
Yes, we have a design department. We provide hardware design, ARM and Mbed system software design, and more.
How long will it take for sample making and mass production?
It takes about 3-5 days to make the sample, and 7-30 days for mass production.
How about the productivity of your services?
We have enough storage for most of our standard products. If you need customized solutions, we operate SMT facility capabilities to fulfill your needs after confirmation.
What about the mode of transportation?
According to the quantity and volume, we will choose the most suitable and cost-effective way of transportation for you. Of course, you are also free to choose the most convenient one.
How do you guarantee the quality of your products?
We use professional instruments and equipment for development and test, and we use manual inspection. Each product will be tested before packaging.

Related Products