F110 Tablet with For MB STAR C6 Diagnosis VCI Multiplexer DoIP
Package List:
- 1 pc x VCI DoIP C6 main Unit
- 1 pc x OBD cable
- 1 pc x USB cable
- 1 pc x F110 Tablet (The software is installed on the tablet)
Please note:
If you only order only software SSD, you will only receive SSD without Hardware and cables!
How to Use VCI DoIP C6?
- Please install the 500GB HDD on laptop above 4GB Memory and I5 CPU, and use it on one laptop only. If change laptop, software may get broken and need to copy software again.
- There is keygen in our software HDD, no need activation.
- This Xentry diagnosis VCI DoIP Pass thur interface C6 can't support All Key Lost, needs one key at least.
Features:
- Support all model series of For Mercedes Benz
- Support DoIP, cover more functions during SCN Coding than SD C4/C5
- Diagnosis updates no longer necessary – firmware updates required on rare occasions
- Does not need a power supply unit for external power supply
- Dandy multiplexer with a small, sturdy construction (no PC core, battery, fan, or display)
Support new cars C206 W223 OEM DoIP Xentry Diagnosis VCI Multiplexer with Software SSD. XENTRY Diagnosis VCI acts as a Pass-through Interface, also called MB Star C6, multiplexer to provide complete communication between a vehicle and the XENTRY software loaded on a PC.
Wireless Connection Test:
Functions & Supported Systems
Functions including diagnosing, programming, simulation studying, repair information, automotive maintenance, technical service bulletin and so on.
Supported Systems:
- Engines (All Gasoline & Diesel Systems)
- Transmissions and Electronic Selector Modules
- Airmatic and Active Body Control Suspension Systems
- Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems
- Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s
- Drive Authorisation System
- Sam (Signal Acquisition) Modules
- Electronic Ignition System (EIS)
- Pneumatic System Equipment and ATA functions
- Air Conditioning / climate control Systems
- Instrument Cluster
- Tyre Pressure Control
- Parktronic System
- Keyless Go
- D2b Command & Audio Gateway (D2B and MOST networks)
- TV Tuner
- Headlamp Range Adjustment
- Seat Electronics
- Rvc, RST & Vario Roof modules
- Automatic Clutch System ACS
- M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)
- Assyst & ASSYST + systems
Frequently Asked Questions
Does this diagnostic tool support DoIP protocol?
Yes, this C6 diagnostic interface supports DoIP (Diagnostic over IP) protocol and covers more functions during SCN coding than standard SD C4 and C5 systems.
Does the software require manual activation?
No, a keygen is included inside the software HDD, which allows you to install and run the system without needing external activation.
Can this C6 system make keys when all keys are lost?
No, this Xentry VCI DoIP Pass-thru interface does not support the "All Keys Lost" situation. You must have at least one working key to perform diagnostic or programming functions.
What laptop hardware requirements are needed to run the software?
It is recommended to run the software on a laptop configured with at least 4GB of RAM and an Intel i5 CPU or above. It should be used on a single laptop to prevent software corruption.
Does the multiplexer require an external power supply?
No, the multiplexer has a compact and sturdy design that does not require an external power supply unit. It is powered directly through the diagnostic port connection.
What new vehicle models are supported by this device?
This tool supports newly released vehicle chassis, including C206 and W223, along with full compatibility for older models.
Kore Auto
![X431 Tablet 10.1 Inch Pro3S+ Auto Diagnostics Tool [Ready to Ship]](https://site.cdnfile.io/5c80f3c21d4d0b369ee670b3713211b8300_300.webp)
